top of page

Guide To Replacing Garage Door Rollers

Updated: Jun 21, 2023

What to Know before you buy

When a garage door won't open, it likely has to do with broken components or aging. This can often include the garage door rollers as they wear out after a while.

In a situation such as this, you will want to know the right way to proceed. This includes trying to do it independently or reaching out to a qualified garage door repair company in the region.

Here is a look at the options available to consider for replacing your garage door rollers.

Repair Garage Door Rollers

Tips On Replacing Garage Door Rollers

1. Inspect the Movement Pattern

First, do a simple inspection of the garage door and its rollers. This means you are going to try to get it to move. Look at a specific part of the garage door that could be causing it to stutter or not move.

There are times when you simply have to tighten the roller and it will begin to work again. A quick inspection is a good way to avoid heavy costs and make sure the garage door functions the way you want it to.

2. Clamp the Track

Next, make sure the garage door doesn't start sliding on you as soon as it is time to work on it. This means clamping the track and making sure the garage door doesn't roll at all. This is a top priority safety measure when trying to do this the right way.

In most cases, you should be clamping the garage door two-thirds of the way from the opening. This should ensure it doesn't move when trying to fix the roller.

3. Release Garage Door Opener

If you have one installed, you will want to release the garage door opener. This is done as a safety measure to ensure you don't get hurt as the garage door opener starts working on its own. This can happen and all garage door openers do have a safety feature in place where you can pull on the string to get it to release the door.

You should also remove the plug from the outlet as an additional precaution. It is always better to be safe than sorry in these situations.

4. Check the Alignment

You will want to take the time to check the alignment before taking out the roller. This is done to see whether or not something else near the roller isn't broken. There are times when debris gets stuck in there and you will want to remove it to clear out the movement pattern. This is why the initial inspection is important too.

You always want to look for easier problems to solve because those don't take long to complete. If there is debris, remove it and test the garage door again.

If it doesn't work, it is time to move on to the next step.

5. Check the Old Roller

You will want to check the older roller now. This is to see how damaged it is and what to do about it. Many people don't think about this because they are already focused on removing the old roller.

You will want to ensure it can't be tweaked to avoid having to take it off. There are some occasions where it is possible, but you can always remove it as required.

Always go through your options to see what can and can't be done. This is beneficial for all types of garage door issues including this one.

6. Remove the Roller

Once you are certain that it is the roller that is giving your garage door issues, it is time to remove it. You will want to loosen the roller and make sure it pops out. For most people, it will slide right out as soon as you begin to loosen it up.

This is why the goal is to stay patient and make sure you look at where the roller is and how damaged it is. Please do not force the issue as it should come out nicely as long as you are working on the garage door properly.

7. Slide the New Roller In Place

Once you have taken out the older roller, you will bring in a brand-new alternative and place it in the same spot.

This should slide in nicely and then you can tighten it as required.

The goal is to make sure you choose a roller that is the right size and will work on the track the way you want it to. Any mistakes in this regard will mean the garage door will not budge even if you put a lot of force.

This is why sliding the new roller into place has to be done methodically. Don't rush it.

8. Speak to a Garage Door Repair Company

You will always want to consider the idea of avoiding a DIY solution for this part of the garage door. It is better to go with a garage door repair company with years of experience and knows what to look out for during the process.

By letting a professional take a look, you will know the best rollers will be used and it is going to work out as you want it to.

This provides peace of mind as a property owner.

Garage Door Repair

Final Thoughts

These are the tips to focus on when it is time to replace aging garage door rollers.

For those in this situation, you should take the time to focus on what works and what doesn't. This includes understanding what your options are.

By going with a trusted option such as Aaron's Garage Door Company, you will access a professional who can complete the process within minutes. It will save you time and ensure things are done the right way.

46 views0 comments

Recent Posts

See All
bottom of page